Alta X Gen2 Essentials Kit (NDAA/Blue)

• Custom Skynode flight controller
• Blue List software provisions to add admin level security and disabled WiFi/LTE
• Compatible with Smart Dovetail equipped payloads (LR1, Flux, OGI, 3rd party, etc)
• Preconfigured with Standard Remote ID for FAA compliance
• Removable chassis panels for integrations
• Upgraded smart batteries (AS150) for better flight time estimation
• Pre-installed accessories to get you flying faster:
  • 12mm Rail Mount for payloads up to 35lbs
  • Smart Dovetail with isolated mount suited for LR1 Payload or other Smart Dovetail payloads up to 3.3lbs
  • Skid Landing Gear with 380 mm / 14.97" quick release legs
  • FPV camera, viewable feed on Pilot Pro
  • 12V and 24V onboard regulators
• Alta X Gen2 Case that safely transports:
  • Alta X Gen2 with 12mm Rails + Smart Dovetail Mount installed
  • Pilot Pro
  • A set of spare ActiveBlade Props
  • Skid Landing Gear (with medium legs or long legs)
• Freefly Pilot Pro Controller (Doodle Labs RF) for precise, robust NDAA/Blue drone control

• Qty 1 - Alta X Gen2 travel case with custom modular insert:
  • Qty 1 - Alta X Gen2 NDAA/Blue (with props and Doodle Labs radio installed)
    • Blue list software provisions disabling WiFi/LTE and adding a layer of admin security
  • Qty 1 each - Hex drivers: 2 mm, 2.5 mm, 3 mm
  • Qty 4 - Velcro prop straps
  • Qty 1 - Spare parts kit
  • Qty 1 - Pilot Pro controller with Doodle Labs radio installed
  • Qty 1 - Skid Landing Gear (Alta X) (medium legs only), mounts installed
  • Qty 1 - 12 mm Rail Payload Mount Kit (Alta X), installed
• Qty 6 - Alta X Gen2 12S Flight Battery (3 pairs)
• Qty 1 - Tattu TA3200 Dual-Channel Smart Charger (charges two batteries at a time)
• Qty 1 each - Replacement ActiveBlades (CW and CCW)

For a full list of sensors and payloads that have been integrated or operated with Alta X Gen2, check out our Drone Payloads page, and filter by Alta X Gen2. 

RGB Sensors

• Freefly LR1 Payload (NDAA/Blue)
• Lenses we've tested with LR1
  • Sigma 24mm F3.5 (included with LR1 payload)
  • Sony FE 35mm F2.8
  • Sony FE 50mm F1.8
  • Samyang 75mm F1.8
• Sentera 65R Sensor (NDAA)

Thermal Sensors

• Freefly LR1 Thermal Pro Upgrade* (NDAA/Blue)
• Freefly LR1 Thermal Upgrade* (NDAA/Blue)
• Sentera 6X Thermal Sensor** (NDAA)
• Sentera 6X Thermal Pro**

Multispectral Sensors

• Sentera 6X Multispectral Sensor* (NDAA/Blue)

Distance Sensors

• Freefly LR1 Laser Range Finder Upgrade* (NDAA)

LiDAR

• Freefly Flux L1 (with optional GNSS Mount)
• Freefly Flux O1 (with optional GNSS Mount) (NDAA)
• Freefly Flux H1 (with optional GNSS Mount)

Power Solutions

• Batteries, Chargers, and Adapters

Landing Gear & Payload Mounting

• Landing Gear Ecosystem
• Mounting Options

Spare Parts

• Replacement Parts Full List
• CW Single Motor Propeller Set for Alta X
• CCW Single Motor Propeller Set for Alta X
• CW Single Motor Propeller Set with ActiveBlade (M4 Fasteners)
• CCW Single Motor Propeller Set with ActiveBlade (M4 Fasteners)

Not compatible with:

• CW Single Motor Propeller Set with ActiveBlade (M12 motors)
• CCW Single Motor Propeller Set with ActiveBlade (M12 motors)

*The LR1 Laser Range Finder Upgrade (910-00841) and LR1 Thermal Upgrade (910-00840/910-00904) are modules for the LR1 Payload and cannot be used on Astro/Alta X Gen2 without the LR1. 

**May require updated ILS mount for Gen2 for existing Sentera sensors from previous applications. 

• Standard Remote ID - YES
  • Ships with Remote ID preinstalled and configured for FAA Standard Remote ID compliance
  • FAA Compliant for Beyond Visual Line of Sight (BVLOS)
• FCC DA 25-1086 - YES
  • Alta X Gen2 ships with FCC approved critical components
• NDAA - Yes
  • Alta X Gen2 NDAA/Blue Drone - Compliant
  • Pilot Pro - Complaint
  • Doodle Labs radio link - Complaint

• DCMA/DIU Blue List - Yes

  • Alta X Gen2 NDAA/Blue Drone - Compliant
  • Pilot Pro Controller - Compliant
  • Doodle Labs radio link - Complaint

• Alta X Gen2 Wiki - Operational guide